Medical Device Battery Packs

Battery packs for ventilators, infusion pumps, patient monitors, oximeters and personal-care devices — single-cell or multi-cell series/parallel builds using polymer pouch, cylindrical or imported cells, in standard, high-temperature, low-temperature, high-rate and long-life variants.

Typical Specifications

ApplicationVentilator, infusion pump, patient monitor, oximeter, beauty & massage device, wearables
Cell optionsLi-polymer pouch / cylindrical Li-ion / imported cells
ConfigurationSingle cell or multi-cell series / parallel
VariantsStandard / high-temperature / low-temperature / high-rate / long-life
ProtectionOver-charge, over-discharge, over-current, over-temperature, short circuit (protection circuit on request)
Cell gradeGenuine Grade-A cells only — never B or C grade
DocumentsUN38.3 / MSDS / IEC 62133 available on request, per model
MOQFlexible — project-based; small batches and single-unit prototypes welcome

* This table describes our capability range rather than fixed catalogue models. Cell chemistry, capacity, variants and connectors are confirmed against your device specification before quoting. Certificates are supplied per model on request — we do not claim certification before it is issued for your specific part.

Lithium-polymer pouch battery pack held in hand

Why Medical Device Makers Talk To Us

1

Multiple Cell Technologies

Polymer pouch, cylindrical Li-ion or imported cells — we pick the chemistry that fits the device instead of forcing one format.

2

Temperature & Rate Variants

Standard, high-temperature, low-temperature, high-rate and long-life builds are available, so a pack can be specified for the real operating environment.

3

Protection Built In

Over-charge, over-discharge, over-current, over-temperature and short-circuit protection are designed to the device requirement.

4

Documents, Per Model

UN38.3, MSDS and IEC 62133 documents are supplied per model on request. We state what is actually issued — never claim approval that does not exist.

Custom battery pack with protection circuit

How to Start

Send us these — a photo or drawing of your current pack helps most: 1. device type and model; 2. voltage and capacity; 3. continuous and peak discharge current; 4. operating temperature range and any high/low-temp requirement; 5. dimensions and connector; 6. certificates your market requires; 7. target annual quantity.

We reply within 24 hours with a specification proposal and pricing tiers.

Send Your Requirement

Get a Quote for Medical Device Battery Packs

Tell us the device, voltage, capacity, temperature range, certificates and quantity — we reply within 24 hours on working days.

Quick Inquiry

We reply to every inquiry within 1 business day. Samples are charged — we do not offer free samples.

Didn't go through? Use this instead

Copy the text below and send it to sales@chengbangbattery.com.

Open email app